Electronic Theatre Controls Emphasis Lighting Control System Specifikace stáhnout pdf (Strana 140)

126 Ion Operations Manual

Storing Presets Live

Presets can be recorded live using the keypad or the direct selects. Both [Record] and [Record

Only] can be used to record presets, with or without filters. See “Storing Data with Record Filters” on

page 176.

[Record] will store all channels that are not at their default values, and it will record all information

about those channels, including parameters that are still at default. Therefore presets can contain

all of the same information as a cue, but they have no timing information or cue attributes (such as

follow, delay, or cue overrides). When recorded or rerecorded, presets are automatically recalled on

stage. Presets may be individually labeled and each has an optional notes field.

If data from a preset is recorded into another preset, when it is recorded it will be changed to either:

• palette data (if it exists in the previous preset)

• or absolute data (if no palette data exists).

Storing Presets Using [Record]

The [Record] key will store all parameter data for channels that are not at their default values, as

modified by the filter settings in the CIA. This will store all parameter data that is not default even if

it is not manual data. If filters are used, only the parameters enabled by the filters are stored.

When you record data to a preset live, the channels involved in that preset will then actually be in

that preset.

The following methods can be used to store presets using [Record]:

• [Record] [Preset] [5] [Label] [name] [Enter] - Records all parameter data for all channels not

at default and adds a label to preset 5.

• [Record] [Preset] [Next] [Enter] - Records data to the next sequential preset number.

• [-] [2] [Record] [Preset] [n] [Enter] - stores the preset, withholding the group or channels

specified.

• [Channel list] [Record] [Preset] [6] [Enter] - stores the preset, but only the data for the

channel list supplied.

• [Record] & {Preset 8} - stores the preset to the specified direct select.

When you rerecord an existing Preset, a confirmation will be required, unless confirmations have

been disabled in Setup.

Note:

When using selective record, you must specify the channel list to be included (or

excluded as the case may be) as part of the [Record] command. Otherwise, all

parameters of channels with non-default values will be stored in the preset.

You may also use the filters and {Make Null} as additional tools to decide what

data will be stored. For more information on these features see Using Filters.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 337 338

Žádné komentáře

Electronic Theatre Controls Emphasis Lighting Control System Specifikace Strana 140