Electronic Theatre Controls Emphasis Lighting Control System Uživatelský manuál Strana 217

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 318
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 216
9 Control Interfaces 207
To set the Remote Trigger ID values on the Express facepanel:
Step 1: Power up or reboot the Express facepanel.
Step 2: When the prompt appears at startup, press [1][2][3] to enter the configuration
menu.
Step 3: Using the down-arrow [
v] key, scroll to Remote Macros and press [Enter].
Step 4: With “Trigger Out System ID” highlighted, press [Enter].
Step 5: Using the facepanel numeric keypad, enter the System ID number. This number
should match the system ID of the facepanel and server.
Step 6: With “Trigger Out Trigger ID” highlighted, press [Enter].
Step 7: Using the facepanel numeric keypad, enter the ID number. This may be any
value between 0-255 (“0” will disable the Remote Trigger). The default value is
“1”. This value should match the value you set in Emphasis Visualization.
Step 8: Press [Enter].
Note:
If you make an error while changing any of these settings, and you want to return to the
previously stored values, do not press
[S8]. Simply turn the facepanel power off and on
again. The previous settings will be restored.
Step 9: Press [S8] to save your settings and exit the Remote Macro configuration
screen.
Step 10: Press [S8] to save your settings and exit the main configuration screen.
Zobrazit stránku 216
1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 317 318

Komentáře k této Příručce

Žádné komentáře