Electronic Theatre Controls PARADIGM Specifikace stáhnout pdf (Strana 13)

7) The rack enclosure shall support 65,000 steps of dimming.

8) The rack enclosure dimming engine shall support multiple dimmer curves including

modified square law, linear, switched, fluorescent, pre-heat and electronic low

voltage.

9) The rack enclosure shall support voltage regulation including, minimum and

maximum scale voltages with offsets

10) Rack enclosure shall support a UL924 listed contact input for emergency lighting

control bypass.

a) Emergency lighting input shall support load shedding

11) Rack enclosures shall be designed to support the following wire terminations:

a) AC

b) Echelon link power (Belden 8471 or equivalent)

c) 24Vdc (2- 16AWG Wire)

d) DMX512A Port A (In or Out) (Belden 9729 or equivalent)

e) DMX512A Port B (Out) (Belden 9729 or equivalent)

f) RS232 Serial In/Out (Belden 9729 or equivalent)

g) Unshielded Twisted Pair (UTP) Category 5/5e Ethernet

h) Contact Closure In (14AWG to 26AWG Wire)

i) Contact Closure Out (14AWG to 26AWG Wire)

1) Contact Closure Out shall provide 1A @ 30vDC

12) Station Power Modules

a) Station power modules shall provide LinkPower for up to 32 stations and

1.5A@24VDC of Auxiliary (AUX) power.

b) Station power repeater modules shall provide LinkPower for 30 stations

and1.5A@24VDC of Auxiliary (AUX) power.

c) Station power module shall support over-current/short protection for LinkPower

and Auxiliary (AUX) power. LinkPower shall support fault detection on each

leg of the balanced data bus.

13) All control wire connections shall be terminated via factory provided connectors.

14) Main feed lugs shall accept a maximum of 350 MCM wire.

15) Load terminals shall accept a maximum of #6 AWG wire.

D) Thermal

1) Ambient room temperature: 0-40°C / 32-104°F

2) Ambient humidity: 10-90% non-condensing

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 50 51

Žádné komentáře

Electronic Theatre Controls PARADIGM Specifikace Strana 13