Electronic Theatre Controls Emphasis Lighting Control System Specifikace Strana 168

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 380
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 167
154 Chapter 13 Submasters
Submaster pages
Express has ten pages of submasters. A page is a block of console
memory that contains one set of recorded submasters, corresponding to
the submaster sliders. The ten pages of memory increases the number
of possible submasters to 240.
The console displays the message Sub page 1 (2, 3...) in the upper left
corner of the display to indicate the current submaster page. To switch
from one page to the other, press [Page], enter the desired page number,
and press [Enter].
When you switch submaster pages, any submasters on stage remain on
stage until you move their sliders to the home position. Until the new
submaster loads, submaster LEDs flash slowly, indicating that the
submaster on stage is from the previously loaded page. When you move
the slider to its home position the new submaster is loaded and the LED
stops flashing. This prevents the stage from going black or changing levels
when you switch pages. (Fast flashes designate a submaster with a dwell
time of Hold. See Submaster LEDs, page 156, for more information about
LEDs.)
Note: When you read a new show into the console from a disk, the
console loads the same page number that was loaded from the previous
show. Any submasters on stage when you read a new show into the
console remain on stage until you move their sliders to the home position.
Until the new submaster loads, submaster LEDs flash, indicating that the
submaster on stage is from the previously loaded show. When you move
the slider to its home position the new submaster is loaded and the LED
stops flashing.
Zobrazit stránku 167
1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 379 380

Komentáře k této Příručce

Žádné komentáře